JEE Advanced · Physics

Thermodynamics PYQs

47 previous-year questions from Thermodynamics in JEE Advanced, 2009–2026, latest first.

Q1JEE Advanced · 17 May 2026 · Paper-1One or more correct
A quasi-static cycle of a monoatomic ideal gas contains an isothermal process (ab), followed by an isochoric process (bc) and an adiabatic process (ca) as shown in the figure. The volumes of the gas are V1 and V2 at a and b, respectively. If the cycle has heat input Qin and output Qout, then the efficiency of the cycle is defined as η = (Qin − Qout)/Qin. The correct statement(s) is/are [Given: ln 2 ≈ 0.7] figure
Question 1
  1. (A)If V2/V1 = 8, the heat released in the process bc is smaller than the heat absorbed in the process ab
  2. (B)For a given value of V2/V1, η does not depend on the temperature of the isothermal process
  3. (C)If V2/V1 = 8, then the temperature of the gas at a is 4 times the temperature of the gas at c
  4. (D)If V2/V1 = 8, then the pressure of the gas at a is 4 times the pressure of the gas at b
Show answer & solution

Answer: A, B, C

Clockwise cycle ⇒⇒\Rightarrow net work > 0 ⇒⇒\Rightarrow Qab > |Qbc| ✓ η = 1 − (CV/R)(1 − (V1/V2)2/3)/ln(V2/V1), independent of Ta ✓ Adiabatic: TaV12/3 = TcV22/3 ⇒⇒\Rightarrow Ta/Tc = 82/3 = 4 ✓ Isothermal: Pa/Pb = V2/V1 = 8 ≠≠\neq 4 ✗
Q2JEE Advanced · 17 May 2026 · Paper-1Numerical answer
As shown in the figure, five Carnot engines, each with efficiency η and same number of cycles per unit time, are operating between six heat reservoirs. The amount of heat released per cycle by one engine is completely absorbed by the next engine. Consider Q0 to be the amount of heat absorbed per cycle by the first engine and W as the amount of total work done by all the engines per cycle, then the net efficiency of the system is found to be ηnet = W/Q0 = 211/243. The value of η is figure
Question 2
Show answer & solution

Answer: 0.33

Qn = Q0(1 − η)n ⇒⇒\Rightarrow ηnet = 1 − (1 − η)5 = 211/243 (1 − η)5 = 32/243 ⇒⇒\Rightarrow 1 − η = 2/3 ⇒⇒\Rightarrow η = 1/3 ≈ 0.33
Q3JEE Advanced · 17 May 2026 · Paper-1Numerical answer
As shown in the figure, an insulated container is fitted with a thermally conducting but immovable partition (P1) and a freely movable but thermally insulated piston (P2). The partition P1 with thermal conductivity K, cross sectional area A and width x divides the container into two sections, S1 and S2, each containing one mole of a monoatomic gas. The piston P2 moves freely such that the gas in S2 is always at the atmospheric pressure. Initially, the difference between the temperatures of S1 and S2 is ΔT0. The time it takes for the temperature difference to become ΔT0/2 is nxR/KA, where R is the universal gas constant. The value of n is [Given: ln 2 ≈ 0.7] figure
Question 3
Show answer & solution

Answer: 0.66

dQ/dt = KAΔT/x; S1 isochoric (CV = 3R/2), S2 isobaric (CP = 5R/2) d(ΔT)/dt = −(KAΔT/x)(2/3R + 2/5R) = −(16/15)(KA/xR)ΔT t = (15/16)(xR/KA) ln 2 = 0.65625 xR/KA ⇒⇒\Rightarrow n ≈ 0.66

44 more Thermodynamics questions

Practise them free

Practise all 47 Thermodynamics PYQs

Untimed with solutions, or as a timed test. Your mistakes are saved so you can retry them.

Start free