JEE Advanced · Physics

Rotational Motion PYQs

53 previous-year questions from Rotational Motion in JEE Advanced, 2009–2026, latest first.

Q1JEE Advanced · 17 May 2026 · Paper-1
Consider a large disk of radius R and two smaller disks, each of radius r = R/50, lying on its circumference, as shown in the figure. The smaller disks are initially in contact with each other, with an angular separation Δθ between their centers. They are made to roll without slipping in opposite directions, with constant angular velocities ω and 2ω while the large disk is held stationary. The time τ at which the smaller disks are again in contact is [Use sin(Δθ) = Δθ and ignore gravity.] figure
Question 1
  1. (A)τ=51×(2π−451)/ωτ = 51 \times (2π − \frac{4}{51})/ω
  2. (B)τ=51×(2π−251)/3ωτ = 51 \times (2π − \frac{2}{51})/3ω
  3. (C)τ=51×(2π−451)/3ωτ = 51 \times (2π − \frac{4}{51})/3ω
  4. (D)τ=51×(2π−251)/ωτ = 51 \times (2π − \frac{2}{51})/ω
Show answer & solution

Answer: C

Contact: sin(Δθ/2) = r/(R + r) ⇒⇒\Rightarrow Δθ = 2/51 rad Centres move on a circle of radius R + r with angular speeds ωr/(R + r) and 2ωr/(R + r) in opposite senses; to touch again from the other side they must together sweep 2π − 2Δθ Relative angular speed 3ωr/(R + r) = 3ω/51 ⇒⇒\Rightarrow τ = (2π − 2Δθ)⋅⋅\cdot51/(3ω) = 51(2π − 4/51)/3ω
Q2JEE Advanced · 17 May 2026 · Paper-1
A solid cylinder of radius R rolls without slipping with a center of mass speed v0 = √√\surd(gR/3) on a horizontal surface with a vertical edge, as shown in the figure. Here, g is the acceleration due to the gravity. At the moment when the cylinder loses contact with the surface due to rotation around the corner, the speed of its center of mass is figure
Question 2
  1. (A)0
  2. (B)5gR7\sqrt{\frac{5gR}{7}}
  3. (C)gR15\sqrt{\frac{gR}{15}}
  4. (D)3gR7\sqrt{\frac{3gR}{7}}
Show answer & solution

Answer: B

Rotation about the corner: I = (3/2)mR2; energy: mgR(1 − cos θ) = (3/4)mR2(ω2 − ω02), ω02 = g/3R Losing contact: ω2R = g cos θ ⇒⇒\Rightarrow g − ω2R = (3/4)Rω2 − g/4 ⇒⇒\Rightarrow ω2 = 5g/7R v = Rω = √√\surd(5gR/7)
Q3JEE Advanced · 17 May 2026 · Paper-1
List-I shows four planar structures made of uniform solid rods each of mass m and length l. In the List-II the possible moment of inertia of these structures about an axis OCO′, which lies in the plane of the structures, are given. Choose the option that describes the correct match between the entries in List-I to those in List-II.
List-I
List-II
(P)figure(1)54mℓ2\frac{5}{4} mℓ^{2}
(Q)figure(2)16mℓ2\frac{1}{6} mℓ^{2}
(R)figure(3)112mℓ2\frac{1}{12} mℓ^{2}
(S)figure(4)23mℓ2\frac{2}{3} mℓ^{2}
(5)13mℓ2\frac{1}{3} mℓ^{2}
Question 3Question 3Question 3Question 3
  1. (A)P →→\rightarrow 5, Q →→\rightarrow 1, R →→\rightarrow 4, S →→\rightarrow 2
  2. (B)P →→\rightarrow 1, Q →→\rightarrow 3, R →→\rightarrow 4, S →→\rightarrow 2
  3. (C)P →→\rightarrow 5, Q →→\rightarrow 3, R →→\rightarrow 2, S →→\rightarrow 1
  4. (D)P →→\rightarrow 5, Q →→\rightarrow 4, R →→\rightarrow 2, S →→\rightarrow 1
Show answer & solution

Answer: A

Rod through the axis at angle α from an end: I = (ml2/3) sin2α (P) 2 ××\times (ml2/3)(1/2) = ml2/3 (5) (Q) 2 ××\times (ml2/3)(3/4) + m(√√\surd3l/2)2 = 5ml2/4 (1) (R) 4 ××\times (ml2/3)(1/2) = 2ml2/3 (4) (S) 2 ××\times (ml2/3)(1/4) = ml2/6 (2)

50 more Rotational Motion questions

Practise them free

Practise all 53 Rotational Motion PYQs

Untimed with solutions, or as a timed test. Your mistakes are saved so you can retry them.

Start free